Whirl Wind offers the PSR Series of airboat propeller blades to for those who need to replace their original Power Shift or Sensenich blades. The PSR blades offer all the benefits of other Whirl Wind blades but these blades will fit in the Power Shift and Sensenich hubs. The PSR blade boasts superior durability with its nickel leading edge and big performance!

Whirl Wind offers the PSR Series of airboat propeller blades to for those who need to replace their original Power Shift or Sensenich blades. The PSR blades offer all the benefits of other Whirl Wind blades but these blades will fit in the Power Shift and Sensenich hubs. The PSR blade boasts superior durability with its nickel leading edge and big performance!

Whirl Wind offers the PSR Series of airboat propeller blades to for those who need to replace their original Power Shift or Sensenich blades. The PSR blades offer all the benefits of other Whirl Wind blades but these blades will fit in the Power Shift and Sensenich hubs. The PSR blade boasts superior durability with its nickel leading edge and big performance!

The Mini Prop blades offer superior durability with the long nickel leading edge and advanced aerospace materials. This mini-propeller has been designed to operate up to a maximum of 2600 RPM, with horsepower ranging from 30 up to 45hp.

Whirl Wind offers the Super Snapperâ„¢ Series of airboat propellers was specifically designed for direct drive aircraft and automotive engines. Two blade Super Snapper is the perfect prop for smaller four cylinders a/c engines. The three-blade Super Snapper is the perfect prop for most six cylinder a/c engines and direct drive automotive engines. This is a very snappy blade while having a minimum noise signature.

The Super Snapper blades are a 10" wide blade that offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate on aircraft motors with horsepower ranging from 125 up to 180. Unit price includes propeller, hub and all hardware for installation. FREE shipping in the US, except Alaska and Hawaii.

The Whisper Tip is equipped with a 24.5" long nickel leading edge that wraps around the tip, and the blade is constructed with advanced aerospace composite materials. This propeller has been designed to operate in RPM ranges from 2700 up to a maximum of 3000, with horsepower ranging from 200 up to 400. Whirl Wind's Whisper Tip Series of airboat propellers was specifically designed for direct drive aircraft and automotive engines. The two blade Whisper Tip is the perfect prop for most 200 to 300 hp a/c and direct drive auto engines. The two blade Whisper Tip has become a fast favorite for the Lycoming 540 engines! The Whisper Tip will give you the most push and lowest noise possible.

Whirl Wind offers the Stump Puller If you are looking for uncompromised performance then this is the propeller for you. The Stump puller is for those who demand the best performance while still having a low noise signature. The Stump Puller blades are over 12" wide blade that also offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2200 up to a maximum of 3000, with horsepower ranging from 200 up to 1000.

1. Engines with 2:1 or greater reduction drives
2. 15" Super Wide Blade
3. Designed for an RPM range of 1800 to 2500

Whirl Wind offers the Super Snapperâ„¢ Series of airboat propellers was specifically designed for direct drive aircraft and automotive engines. Two blade Super Snapper is the perfect prop for smaller four cylinders a/c engines. The three-blade Super Snapper is the perfect prop for most six cylinder a/c engines and direct drive automotive engines. This is a very snappy blade while having a minimum noise signature.

The Super Snapper blades are a 10" wide blade that offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2700 up to a maximum of 3000, with horsepower ranging from 125 up to 400. Unit price includes propeller, hub and all hardware for installation. FREE shipping in the US, except Alaska and Hawaii.

The Whisper Tip is equipped with a 24.5" long nickel leading edge that wraps around the tip, and the blade is constructed with advanced aerospace composite materials. This propeller has been designed to operate in RPM ranges from 2700 up to a maximum of 3000, with horsepower ranging from 200 up to 400. Whirl Wind's Whisper Tip Series of airboat propellers was specifically designed for direct drive aircraft and automotive engines. The two blade Whisper Tip is the perfect prop for most 200 to 300 hp a/c and direct drive auto engines. The two blade Whisper Tip has become a fast favorite for the Lycoming 540 engines! The Whisper Tip will give you the most push and lowest noise possible.

Whirl Wind offers the Stump Puller If you are looking for uncompromised performance then this is the propeller for you. The Stump puller is for those who demand the best performance while still having a low noise signature. The Stump Puller blades are over 12" wide blade that also offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2200 up to a maximum of 3000, with horsepower ranging from 200 up to 1000.

Whirl Wind offers the Stump Puller If you are looking for uncompromised performance then this is the propeller for you. The Stump puller is for those who demand the best performance while still having a low noise signature. The Stump Puller blades are over 12" wide blade that also offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2200 up to a maximum of 3000, with horsepower ranging from 200 up to 1000.

Whirl Wind offers the Super Snapperâ„¢ Series of airboat propellers was specifically designed for direct drive aircraft and automotive engines. Two blade Super Snapper is the perfect prop for smaller four cylinders a/c engines. The three-blade Super Snapper is the perfect prop for most six cylinder a/c engines and direct drive automotive engines. This is a very snappy blade while having a minimum noise signature.

The Super Snapper blades are a 10" wide blade that offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2700 up to a maximum of 3000, with horsepower ranging from 125 up to 400. Unit price includes propeller, hub and all hardware for installation. FREE shipping in the US, except Alaska and Hawaii.

1. Engines with 2.38 or greater reduction drives
2. 15" Super Wide Blade
3. Designed for an RPM range of 1450 to 2250

Unit price includes propeller, hub and all hardware for installation. FREE shipping in the US, except Alaska and Hawaii.

Whirl Wind offers the Stump Puller If you are looking for uncompromised performance then this is the propeller for you. The Stump puller is for those who demand the best performance while still having a low noise signature. The Stump Puller blades are over 12" wide blade that also offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2200 up to a maximum of 3000, with horsepower ranging from 200 up to 1000.

The Whisper Tip is equipped with a 24.5" long nickel leading edge that wraps around the tip, and the blade is constructed with advanced aerospace composite materials. This propeller has been designed to operate in RPM ranges from 2700 up to a maximum of 3000, with horsepower ranging from 200 up to 400. Whirl Wind's Whisper Tip Series of airboat propellers was specifically designed for direct drive aircraft and automotive engines. The two blade Whisper Tip is the perfect prop for most 200 to 300 hp a/c and direct drive auto engines. The two blade Whisper Tip has become a fast favorite for the Lycoming 540 engines! The Whisper Tip will give you the most push and lowest noise possible.

Whirl Wind offers the Stump Puller If you are looking for uncompromised performance then this is the propeller for you. The Stump puller is for those who demand the best performance while still having a low noise signature. The Stump Puller blades are over 12" wide blade that also offers superior durability with its nickel leading edge and aerospace materials. This propeller has been designed to operate in RPM ranges from 2200 up to a maximum of 3000, with horsepower ranging from 200 up to 1000.

1. Engines with 2.38 or greater reduction drives
2. 15" Super Wide Blade
3. Designed for an RPM range of 1450 to 2250

Unit price includes propeller, hub and all hardware for installation. FREE shipping in the US, except Alaska and Hawaii.